Newest Products

Good mix of strength and weight. Can't go wrong with this rim. Strength + lightweight = super good and trendy! Fully welded joint construction Dir...

100% “4Q Baked”, Heat Treated 4130 CrMo Straight Gauge .065″ Wall 4130 CrMo Tubing Dual Radius Bends w/ large top bend to increase strength Americ...

The ECLAT ONYX CRANK are designed to take some serious abuse with its oversized super-hollow 24mm spindle, and a dependable 3pc design with a super...

7005 aluminum with a pulse welded seam and internal I-Beam structure for extra durability. Lots of holes drilled in the inner wall to help save wei...

Tried and true sweeps, heat treated and butted 4130 chromoly tubing and rises to satisfy most any rider's needs. The Fiend team bars can withstand ...

The Cult half link chain features a Teflon coating with engraved Cult logos and is designed to help dial in the rear end length on frames with shor...

The Cult 510 chain features a Teflon coating with stamped Cult logos, heat-treated riveted pins, and thicker side plates to increase strength and p...

This year, Odyssey went back to the splash drawing board and re-evaluated their range of forks. The result, after almost a complete redesign, are t...

This year, Odyssey went back to the splash drawing board and re-evaluated their range of forks. The result, after almost a complete redesign, are t...

7005 aluminum rim with welded seam, sidewalls have a short vertical section then an angled portion, spoke holes are drilled for traditional lacing....

REALLY?? WASN'T THE 10" RISE BAR CRAZY ENOUGH? NOW WE HAVE TO DEAL WITH THESE THINGS?? CRAZY HOW BMX TRENDS WORK. MADE FROM SOMETHING THAT PROBA...

RISE: 8.7" or 9.25" WIDTH: 29" for 8.7"/ 30" for 9.25" UPSWEEP: 3 degree BACK SWEEP: 11 degree CROSS BAR: 5/8" WEIGHT: 2.13 lb (.97 kg) MAT...

Sunday Saker cranks feature in house designs to provide the highest quality and durability while retaining a low retail price.weight = 31 oz. w/o BB

It would seem that someone in the world thinks 11" bars are needed. He better be at least 7 feet tall! Rise: 11" Width: 30" Backsweep: 11 Upswee...

Profile 3 Piece Cranks have been by far the most popular cranks in BMX for many years. Included in the crankset is 2 arms, the spindle and all the...

Double wall rim made from 6061-T6 aluminum. Unlike most pinned rims the quadrant uses four pins instead of 2 for more strength. Decent rim at a gre...

Same as the great Pitchfork XLT but with tapered legs to help save an ounce or so. The Pitchfork XLT is made in the USA of 100% "4Q Baked" heat tre...

REALLY?? DO YOU NEED BARS THAT ARE 10" TALL?? NO MATTER IF YOU DO OR NOT YOU PROBABLY WANT THEM ANYWAY. MADE FROM HEAT TREATED CHROMOLY 10" ...

The Hoder High Bars are huge and pissed of...much like Mike Hoder himself. 9" rise 11118.5 11 degree back sweep 1.5 degree up sweep 30" wide weig...

Classic 3 piece design featuring tubular chromoly arms with a 48 splined, 22mm hollow chromoly spindle. Made to handle some pretty rough street ri...

Made from 6061 aluminum with a welded seam, hard anodized finish and a slightly rounded look. Fresh and clean yet light and strong. Weight: 14.7oz