BMX Bike Parts

The Demolition Flush Mount Spindle Bolts For 24mm Cranks are made from high grade aluminum and will help some weight over the stock bolts (2oz). Al...

The Demolition Hammerhead Tire was designed by Demolition Parts Pro rider, Mike "Hucker" Clark. The Hammerhead is a rad BMX tire because it comes i...

Features: Kevin Peraza Signature Bar Rise: 9″ or 9.25″ Width: 29″ Backsweep: 12° Upsweep: 2° Crossbar OD: .75″ Crossbar Height: 6.5″ (9″) & 6...

The Demolition Kris Fox Heretics Fork is made from 100% heat-treated CRMO tubing. Wider blades to fit bigger tires.  Featuring a 1-pc internally an...

The Demolition Momentum II 29" Tire is an even closer replica to the original 20" version of the Momentum tire. Now in a wider 2.4" width. 60TPI ca...

Lightest wire bead tire available! New high pressure (110 psi), lightweight, wire bead tire. Featuring low profile rectangle tread pattern for grip...

The Demolition Rotator V4 ProPlus Freecoaster Wheel features Demolition's all new Rotator V4 Freecoaster laced up to the new Zero Plus rim. All new...

Sold in Pairs Designed With Team Input 10 Square Molded Pins Horizontal Concave for Grip Nylon Plastic Body for Extra Life 2 Unsealed Bearings Hea...

The Demolition Zero Rim has been around for many years in BMX without changing and that's because it didn't need to. The Zero rim has a classic lo...

****NOTE**** DOES NOT COME WITH THE LOCKING BUTTONS. A DARN TOOTIN' GOOD LEVER. GET SOME AND ALL THE COOL KIDS WILL LIKE YOU. WELL AT LEAST I HOPE ...

DIA TEC HAD TO MAKE SOMETHING TO COMPETE WITH THE 990 SO HERE IT IS. IT DOES HAVE ONE BETTER POINT OVER A 990 ALSO. FOR THOSE RUNNING A SMALLER SPR...

The Dia Tec Hombre Brake (996) is a "U" brake that most frames with U brake / 990 mounts.  Set up to work on the front or the rear. **may vary slig...

The Dia-Compe 128 Tech 6 Locking Brake Levers to the eye seem to be identical to the originals from the 80's. The levers are sold as a set and both...

The Dia-Compe 883 Nippon Caliper Brake was one of the most sought after brakes in the BMX freestyle world in the 80's and 90's an is a must have fo...

The Dia-Compe 883 Nippon Caliper Brake was one of the most sought after brakes in the BMX freestyle world in the 80's and 90's an is a must have fo...

Side pull brake Cold forged aluminum construction Quick release 68-86MM reach 210g

The Dia-Compe FS-990 Brake could be the missing piece you need for your retro Freestyle BMX Bike build. These brake have been in production for 30...

Re-issue Dia-Compe Tech 3 brake lever set. Remember these levers require "end buttons" as they have no threaded adjusters. Grab some here. Sold in...

DIA-COMPE Tech 2 / MX 120 2 Finger Brake Levers Sold as a set Fit standard 7/8" tubing 70's

Re-issue of an old school classic lever design Aluminum hinged clamp with cold forged aluminum lever Clamp compatible with 22.2 or 23.8mm bar size

Designed for caliper & u-brakes Cold forged double bent lever / 2 piece hinged aluminum clamp Ultra short 1 finger 25.4mm (1") clamp with shi...

The DiaTech Dirty Harry Right Brake Lever. Sharp bend for knuckle clearance and hinged clamp. Fits 22.2mm Bars Hinged clamp Adjustable reach Lever...

The Ditto BMX 1984 'OG' 22" Fork are a super quality fork for the 22" shredders with a unique twist, removable brake mounts. Whether you just need ...